SCAT Machine Photo Album

Model M406-2006 Human Waste Disposal System

The SCAT Machine® model M406-2006 as shown, a portable toilet dumping station, is designed for use at marinas, river system take-out points, and anywhere "Honey Pot" type waste disposal ispracticed. This system provides a user friendly, sanitary means to properly dispose of human waste from the large volume toilets used by boaters. When connected to an approved septic leach line system or sewage treatment facility, proper disposal of this waste is ensured while participating in a non-containerized waste carry-out program (i.e.- no plastic, paper bags, or peat pots). With its industrial grade components and stainless steel construction throughout, the M406 model SCAT Machine® will yield years of low maintenance, low cost service. The fee access feature standard on this model allows the purchaser a means of collecting revenue to offset maintenance and operating costs, as well as, a profitable service if desired. This fee access system also helps prevent vandalism to the inside of the machine and undesirable garbage from being deposited within by passers by. The M406 model SCAT Machine® through various cycles and washing nozzles produces a semi-high pressure, high volume wash that removes the waste from the portable toilet, rinses the toilet inside and out, and slurries the waste into a septic system ready form. It then discharges the waste into the septic system and performs a self rinse cycle that leaves the machine ready for the next use. A sanitizing agent (compatible with the attached septic system) can be used to add to sanitation and control odors. The sanitizing agent is introduced into the rinse cycle via an automatic injection system standard on the M406. Periodic cleaning maintenance can be performed by maintenance personnel by using hand held spray gun equipment with the machine in the manual mode. The SCAT Machine® model M406 will accept the following types of toilets: 20mm ammunition boxes, 5 gallon plastic buckets, the Green Machine, the Johnnie Partner toilet, the Scat Packer, and other toilets of similar design.

Price:  $44,155

delivered and setup within 350 miles of Frenchglen, Oregon.  Additional mileage will be extra.

These photos are of the SCAT Machine installation in Maupin, Oregon completed fall of 2002. This site services the Lower Deschutes River.

STANDARD FEATURES INCLUDE:

  • PLC Controlled

  • Fee access locking system

  • Use counter

  • Automatic chemical agent injection

  • Chemical agent metering system

  • Heavy duty valves and nozzles

  • Hand held maintenance spray equipment

  • 60 gallon fresh water supply reservoir

  • 12 gallon chemical reservoir

  • Automatic toilet dumping

  • Industrial hydraulic service lines

  • Sturdy corrosive resistant 304 stainless steel construction

  • 3 stage centrifugal pumping system

  • Stainless steel corrosion resistant rotating nozzles

  • Accessory wash rack (for toilet lids and/or seats)

  • 4" waste water outlet with clean-out

  • Self rinsing cycle

  • Bill validator system actuation

  • User instruction placards with photo demonstration

  • Easy access/easy to use control panel

  • Waste outlet restriction overflow protection

  • Triple back flow protection to the fresh water inlet

  • Automatic in operation user lock-out

  • Quick disconnect portability

  • Owners manual

  • One year warranty on parts if placed inside a building

 OPTIONS INCLUDE:

  • Large capacity fresh water supply reservoir

  • Token acceptor system actuator

  • Fresh water supply transfer systems

  • Gen-Set power supply (for remote locations)

  • Pre-cast concrete mounting pads

  • Prefab machine enclosures w/concrete mounting pad

  • Other site specific customizations

Frenchglen Products Photo Albums

The SCAT Machine is manufactured by Frenchglen Blacksmiths.  For additional information, please contact Frenchglen Blacksmiths, 39269 Hwy 205, Frenchglen, Oregon  97736, 541-495-2315/800-977-3995.